Welcome to the 3rd Generation Maxima BBS All information on this site is provided without any guarantee of accuracy, completeness, or relevance. 4DSC.com and the content authors deny any and all responsibility for any damage to person or property that may occur due to use of the information on this site.

• ARCHIVE in 5 minutes. n/m - Administrator (Maxima) 16:46:44 11/10/2003 (0)
• Craig B, you got mail. nm - Mr. Rose (91' SE) 16:40:10 11/10/2003 (0)
• intake question - Pranol (92 VG Aus Spec) 16:23:03 11/10/2003 (1)
  • Huh?? replace the pipe with duct tape?? - DA-MAX (1990 Integra GS) 16:36:11 11/10/2003 (0)
• Overfilled Gas tank - Danny (93 GXE) 14:32:27 11/10/2003 (5)
  • but the leak stopped after liek 5 secs or so, probably a cup or so leaked out, still the fuel filler? n/m - Danny (93 GXE) 15:03:34 11/10/2003 (1)
    • could be...icture it as a bottle on it's side... - lophix (91se) 15:09:56 11/10/2003 (0)
  • You have the infamous fuel filler - abdul (VE) 14:46:01 11/10/2003 (0)
  • 1.) call the EPA to clean the chemical spill. 2.) drive on the interstate and use the fuel. n/m - Kaleb (Black '93 GXE 5spd) 14:43:25 11/10/2003 (0)
  • Re: Overfilled Gas tank - Danny (93 GXE) 14:33:15 11/10/2003 (0)
• will an ABS module from a 95 or 96 work on my 94 SE? - Jaysinet (94 SE) 14:28:29 11/10/2003 (4)
  • Yes it will fit and work perfectly (more) --> - Kaleb (Black '93 GXE 5spd) 14:44:03 11/10/2003 (3)
    • You are an arrogant little bitch and I bet your fat ass didn't get beat enough in high school. Fuck off. - God ( ) 15:22:51 11/10/2003 (1)
      • relax..it's the internet. why not post under a normal poster name but use "God"? nm - DanNY (91SE) 15:39:50 11/10/2003 (0)
    • I was hoping.... - jaysinet (94 SE) 14:57:47 11/10/2003 (0)
• OTish: Of course speed cameras are a good idea... - Uncle Pete (89 SE) 14:04:09 11/10/2003 (0)
• Here's my rough plan for this summer.... - NicZ (93SE 89GXE) 11:43:53 11/10/2003 (16)
  • not sure on the VE but if you hot tank the heads I am... - awsm66 (93SE) 12:04:41 11/10/2003 (14)
    • Cam bearings? AFAIK, the cams ride directly on the journals that - Jeff92se (92se) 12:11:28 11/10/2003 (12)
      • well now thats why I said "I dont know about the VE"... LOL.nm. - awsm66 (93SE ) 12:19:08 11/10/2003 (0)
      • Pic - Jeff92se (92se) 12:13:10 11/10/2003 (10)
        • Got anymore naked VE pics? I love seeing a naked VE :) n/m - dmontzsta (92 SE) 12:37:03 11/10/2003 (9)
          • Got varnish? - Jeff92se (92se) 12:44:17 11/10/2003 (8)
            • ahhh man, you are just teasin me now...ANYONE else have pics? n/m - dmontzsta (92 SE) 13:35:55 11/10/2003 (7)
              • I took a bunch when I tore mine apart, but my film came back blank. So I bought a digital camera. n/m - RosenKen (93 SE 5spd) 14:15:52 11/10/2003 (6)
                • Can deny what a man wants - MIKE (93VE) 14:24:05 11/10/2003 (5)
                  • What are those two fittings at the bottom do? - Jeff92se (92se) 14:53:31 11/10/2003 (4)
                    • Screw into the Z32 caliper n/m - MIKE (93VE) 15:16:05 11/10/2003 (3)
                      • I didn't see your second question. The fitting came with the brake lines n/m - MIKE (93VE) 15:17:28 11/10/2003 (2)
                        • Can you advise where you bought the lines from? I need these. n/m - Jeff92se (92se) 15:28:38 11/10/2003 (1)
                          • Yes I can. YGM in a few minutes n/m - MIKE (93VE) 15:46:17 11/10/2003 (0)
    • lol that middle part is kinda confusing...just move the... - awsm66 (93SE) 12:07:07 11/10/2003 (0)
  • a.) Don't overbore it, you'll never finish by August if you have to work during summer. b.) Replace rod and/or main bearings n/m - Kaleb (Black '93 GXE 5spd) 12:03:26 11/10/2003 (0)
• Hey offset Guru's....... - 8ball (89 SE 5spd) 03:19:51 11/10/2003 (7)
  • No problem, I am running 17x8 with 35 offset on 235/40/17 and Intrax. n/m - dmontzsta (92 SE) 09:21:02 11/10/2003 (5)
    • Would you mind posting a link and/or pics of side views and body line view so I see where they sit in relation to the door plz? - 8ball (89 SE 5spd) 10:17:58 11/10/2003 (4)
      • no problem-----> - dmontzsta (92 Se) 12:35:42 11/10/2003 (0)
      • 17x8 / 30-32mm offset / 245-45-17s. Your won't tuck a nice but--> - Jeff92se (92se) 10:36:56 11/10/2003 (2)
        • Nice Jeff, too nice. n - Mr. Rose (91 SE) 16:42:09 11/10/2003 (0)
        • Cripes. "yours" and "as". and "your's" - Jeff92se (92se) 11:02:44 11/10/2003 (0)
  • Yup. they're fine. I'm running 17x8, 32mm and 17x8, 34mm. both have more room. nm - Matt (93SE) 08:43:47 11/10/2003 (0)
• Well, got bored and went drag racing tonight... - Matt (93SE) 01:25:08 11/10/2003 (10)
  • Wow your new record! Sweet. n/m - Kaleb (Black '93 GXE 5spd) 12:00:27 11/10/2003 (0)
  • Heh.. I wonder if the tranny shop will still honor my warranty--> - Matt (93SE) 09:58:49 11/10/2003 (0)
  • Dang, nice times dude, I wish I could do that :) how many mile you have? - dmontzsta (92 SE) 09:22:17 11/10/2003 (1)
    • When I left the house last night, I had 199,700 miles. :) --> - Matt (93SE) 09:28:17 11/10/2003 (0)
  • the right one...u fell asleep at the tree? LOL nm - DanNY (91SE) 08:30:58 11/10/2003 (0)
  • Not doggin ya man, but just imagine what you could run if you cut a good light. n/m - 8ball (89 SE 5spd) 02:31:59 11/10/2003 (2)
    • These were instant green lights, no yellows on the tree.. you stage, wait a few, then GREEN. annoying. nm - Matt (93SE) 08:42:51 11/10/2003 (1)
      • Ewwww. prostreet lights SUK - 8ball (89 SE 5spd) 08:45:40 11/10/2003 (0)
  • Niiiice....I assume without the stereo? nm - James (VE 5spd ) 01:59:50 11/10/2003 (1)
    • I yanked the amp rack, but left the spare, carpet, jack, etc in there. --> - Matt (93SE) 02:06:01 11/10/2003 (0)
• how much of a difference do muffler's really make? - Derrick (94 GXE) 23:46:16 11/09/2003 (13)
  • I think if anybody knows about the effects on performance mods, it would be me --> - Aaron (92 SE Auto) 00:33:07 11/10/2003 (10)
    • Also remember a 2.5" smooth exhaust is capable of supporting 500HP worth of air flow n/m - Kaleb (Black '93 GXE 5spd) 00:55:20 11/10/2003 (4)
      • Whatever, but a 2.5" mandrel Y and cutout is capable of more. And plus, who up here does 500hp? None YET. :) n/m - Aaron (92 SE Auto) 01:00:59 11/10/2003 (3)
        • Yo I wasn't arguing against you I was arguing against people thinking they need 3" exhaust. n/m - Kaleb (Black '93 GXE 5spd) 01:14:21 11/10/2003 (2)
          • I do, but then again, my exhaust guy hasn't told me what dia he's decided on 3#-) n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 06:56:11 11/10/2003 (1)
            • Turbochargers change everything. n/m - Kaleb (Black '93 GXE 5spd) 11:56:31 11/10/2003 (0)
    • agreed ... how to gain more torque down low where we VE people are lacking power? - Joel G. ('92 SE) 00:47:30 11/10/2003 (4)
      • Why do you think the VE has no low end?! It's got 150lb tq at 1500rpm, and rises to 160 by 2000rpm. - Matt (93SE) 09:24:06 11/10/2003 (2)
        • But is that with functional VTC's?? n/m - mentat (93se 5spd) 12:34:02 11/10/2003 (1)
          • function VTC dyno - Jeff92se (92se) 12:49:21 11/10/2003 (0)
      • If you really want to gain low end on an auto, then get smaller tires and TC ... - Aaron (92 SE Auto) 00:53:50 11/10/2003 (0)
  • attn: chris, jeff where is the best place to order a 2k+ muffler? n/m - Derrick (94 GXE) 00:05:31 11/10/2003 (1)
    • .org is probably the easies or carpart.com. I think a 2.25-2.5" cat back with a 2k muffler is the best combo n/m - Jeff92se (92se) 10:34:19 11/10/2003 (0)
• MIKE 93VE, email me - «§» (93 SE) 23:33:54 11/09/2003 (0)
• Attn: JASON re: parting out maxima - Chad ('89 SE) 22:41:15 11/09/2003 (0)
• Anyone need copies of FSBs? - NicZ (93SE 89GXE ) 22:35:32 11/09/2003 (5)
  • would be sweet to have the nissan repair pdf set for our 3rd gens - Joel G. ('92 SE) 00:13:25 11/10/2003 (0)
  • While your at it, I'd love to have the 350Z FSB! - Killermove (350Z) 23:33:22 11/09/2003 (1)
    • They make bulitins for each problem... - NicZ (93SE 89GXE ) 00:05:54 11/10/2003 (0)
  • find me one for a 2000 camry :) nm - DanNY (91SE) 22:56:43 11/09/2003 (0)
  • Get all of them! :o) n/m - Kaleb (Black '93 GXE 5spd) 22:55:08 11/09/2003 (0)
• Mr Rose... re: photoshop request - «§» (93 SE) 21:12:45 11/09/2003 (0)
• Used parts - Jason (89 SE Maxima) 20:53:59 11/09/2003 (2)
  • Maybe you should tell us what parts you have to sell. n/m - Pervis Anathema ('91 SE) 21:33:08 11/09/2003 (1)
    • Re: Maybe you should tell us what parts you have to sell. n/m - Jason (1989 SE) 21:47:55 11/09/2003 (0)
• BMW conversion - Gary Brown (91 Nissan Maxima SE) 19:06:48 11/09/2003 (3)
  • Re: BMW conversion - «§»Craig B«§» (93 SE) 20:18:22 11/09/2003 (2)
    • OT: There's something about those older southern brick homes I like. n/m - MIKE (93VE) 20:42:01 11/09/2003 (1)
      • actually that's an office park by my house - «§» (93 SE) 21:10:11 11/09/2003 (0)
• Anyone ever say our OEM exhaust manifolds with the heat shields removed? - MIKE (93VE) 16:36:09 11/09/2003 (3)
  • I was thinking of JetHot coating mine to keep the engine bay cooler and get a nice look... - dmontzsta (92 SE) 18:41:14 11/09/2003 (1)
    • It didn't come off as easy as I thought it would have - MIKE (93VE) 20:36:57 11/09/2003 (0)
  • Yup. some sort of Stainless Steel even. :) nm - Matt (93SE) 16:38:56 11/09/2003 (0)
• I forgot, here is a picture of my WSP Testpipe with cutout --> - Aaron (92 SE Auto) 15:39:22 11/09/2003 (2)
  • *right click, save image as* hehe...looks good! nm - DA-MAX (1990 Integra GS) 15:41:53 11/09/2003 (1)
    • Hehe, I basically left a few inches on each side of the testpipe, dry fitted it with couplings, then welded them. I like it. n/m - Aaron (92 SE Auto) 16:52:02 11/09/2003 (0)
• What Size Rear Spkrs for non-bose '93? - 93MAX ('93 Maixma) 14:12:56 11/09/2003 (1)
  • "Active speaker" system is 6.5" in the rear. nm - DA-MAX (1990 Integra GS) 14:45:49 11/09/2003 (0)
• Passenger A/C Vent - Danny (93 GXE) 12:42:21 11/09/2003 (2)
  • Re: Passenger A/C Vent - Danny (93 GXE) 12:43:49 11/09/2003 (1)
    • i believe u must pull the dash out...nm - DanNY (91SE) 13:13:10 11/09/2003 (0)
• Anyone see the message - Patrick C. (92GXE) 12:35:51 11/09/2003 (0)
• Heres what I did on my freezing saturday, link with pics --> - Kevin (93SE 5sp) 10:07:26 11/09/2003 (0)
• BMW Headlight Conversion page MOVED - SkyMax (Integra) 01:06:29 11/09/2003 (7)
  • Your welcome guys. DanNY, I'm still a Maxima fan so I'll pop in every now and then. :) n/m - SkyMax (Bayside Blue Integra) 00:56:05 11/10/2003 (0)
  • damn man good to see you're still around..nm - DanNY (91SE) 10:32:24 11/09/2003 (0)
  • Offer - Dave (95 GLE) 02:16:54 11/09/2003 (2)
    • Re: Offer - SkyMax (Bayside Blue Integra) 00:53:03 11/10/2003 (1)
      • Re: Offer - Dave (95 GLE) 12:08:19 11/10/2003 (0)
  • Thank you n/m - Bman (92 SE) 01:59:02 11/09/2003 (0)
  • Thanks Nevin. :) - Lordrandall (92se5) 01:25:59 11/09/2003 (0)
• What would cause a starter to keep going out? - dmontzsta (92 SE) 22:13:49 11/08/2003 (10)
  • Head over to an Autozone or similar.... - Lordrandall (92se5) 23:41:13 11/08/2003 (2)
    • Alternator is less than 1 year old and the battery is a Optima Red Top less than one year. what do you think? n/m - dmontzsta (92 SE) 23:43:38 11/08/2003 (1)
      • Might as well get them tested. nm - Lordrandall (92se5) 00:06:57 11/09/2003 (0)
  • Battery cables and connectors in good shape? if they're corroded, they'll cause it too. nm - Matt (93SE) 23:07:20 11/08/2003 (2)
    • Actually they are original. This could be a good time to replace them with... - dmontzsta (92 SE) 23:27:52 11/08/2003 (1)
      • Any car audio shop. I'd wager part of your problem is the connectors. nm - Matt (93SE) 00:16:29 11/09/2003 (0)
  • Clicking and no cranking could just be the starter relay going bad early. --> - John vdP (93SE) 22:28:33 11/08/2003 (3)
    • Is the relay on the starter? or seperate? n/m - dmontzsta (92 SE) 22:29:55 11/08/2003 (2)
      • On every car I've ever worked on --> - John vdP (93SE) 10:35:09 11/09/2003 (1)
        • Relay or solenoid? Sounds like you're describing the solenoid? n/m - Jeff92se (92se) 11:04:40 11/10/2003 (0)
• Trying to find a picture... - Mr. Rose (91 SE) 21:07:01 11/08/2003 (0)
• Seatbelt??? Can You do this??? - Patrick C. (92GXE) 20:34:06 11/08/2003 (0)
• OT: 240SX pictures... - Mr. Rose (91 SE) 19:45:30 11/08/2003 (1)
  • Get rid of the stickers and paint the hood. Then I'll take it. nm - Lordrandall (92se5) 23:42:45 11/08/2003 (0)
• Just a reminder for the winter... - Mr. Rose (91' SE) 19:43:03 11/08/2003 (5)
  • Your wheels are really light. The tires are a tad heavier... - Bman (92 SE) 00:12:33 11/09/2003 (0)
  • That's pretty darn light. how much tread is on the Kumhos at that weight? nm - Matt (93SE) 19:56:03 11/08/2003 (3)
    • Pardon the philosophical interjection here but ever wondered if Kum-hos were made for gangsta riceboi vehicles, hence the name?? 3#-) n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 07:25:41 11/09/2003 (0)
    • about... - Mr. Rose (91 SE) 20:23:13 11/08/2003 (1)
      • 2 years and you still have 80% left?! I wish! Mine last about 4 months! nm - Matt (93SE) 23:04:49 11/08/2003 (0)
• OTish: Went to the classic car show today... - Uncle Pete (89 SE) 18:20:37 11/08/2003 (2)
  • nice, Mike should get rid of that boring FTO and get the 635 - «§» (93 SE) 16:52:52 11/09/2003 (0)
  • Heh... I wen't to SEMA on Thursday... what few pics I have I don't know where to upload... - Dark Lord Bunny (89 SE) 21:36:46 11/08/2003 (0)
• Where is the plug for the 02 sensor?....... - KLoWnPR109 (89 GXE five speed) 18:18:29 11/08/2003 (2)
  • In the socket 3#-) n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 18:33:35 11/08/2003 (1)
    • Seriously though, it's on the rear engine mount. Just follow the wires from the sensor. n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 18:34:13 11/08/2003 (0)
• OT Anyone near Brandenton FL??? - Justin Mc (89se 90se (89GXE)) 15:12:36 11/08/2003 (0)
• Nissan related... - Mr. Rose (91' SE 5spd) 14:58:47 11/08/2003 (1)
  • Oh, and... - Mr. Rose (91' SE 5spd) 15:00:10 11/08/2003 (0)
• kind of new here... - Maxima_Mike ('94 SE) 04:57:52 11/08/2003 (9)
  • Fit? yes. Work? not well. nm - Matt (93SE) 10:32:38 11/08/2003 (0)
  • You're right, you don't know much ... if a Max never had a turbo, it will never fit easily. Think son. n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 06:07:03 11/08/2003 (6)
    • Re: You're right, you don't know much ... if a Max never had a turbo, it will never fit easily. Think son. n/m - Maxima_Mike ('94 SE) 15:33:05 11/08/2003 (5)
      • Hahahahaha. n/m - Will (93 4dsc) 09:44:21 11/09/2003 (0)
      • Then don't think of more horsepower until you've gained enough driving experience. n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 18:32:50 11/08/2003 (0)
      • In that case, 190hp is more than enough for you. n/m - Bryan (frm 91,92 SE) 17:04:37 11/08/2003 (2)
        • LOL n/m - MIKE (93VE) 17:38:23 11/08/2003 (0)
        • true dat. Its fast enough to get you in plenty o' trouble. n/m - unsigned (92SE/89GXE) 17:26:47 11/08/2003 (0)
  • Only after the muffler bearings are adjusted for clearance lol :p - Nismo87se (91 se-r) 05:57:34 11/08/2003 (0)
• Well, I just got back from the track with my new wheels and cutout --> - Aaron (92 SE Auto) 01:05:36 11/08/2003 (12)
  • Interesting reading, thanks n/m - Bman (92 SE) 00:04:48 11/09/2003 (0)
  • Nice job Aaron... - DA-MAX (1990 Intgera GS) 23:06:39 11/08/2003 (1)
    • The noise level is STUPID SICK!!! CRAZY! :) ... - Aaron (92 SE Auto) 23:36:31 11/08/2003 (0)
  • This is good news! - dmontzsta (92 SE) 08:44:59 11/08/2003 (1)
    • I still want to try Carlsbad, it's a crappy track, but I am able to hook up off the line. n/m - Aaron (92 SE Auto) 23:34:30 11/08/2003 (0)
  • You know what's amazing - MIKE (93VE) 05:45:44 11/08/2003 (4)
    • If I ran back in NC, there's no doubt in my mind what times I will run --> - Aaron (92 SE Auto) 23:29:53 11/08/2003 (0)
    • Believe me 2 tenths is pretty good... - Nismo87se (91 se-r) 05:56:35 11/08/2003 (2)
      • Yeah, my car is an 1/8 mile BEAST with this gearing ... - Aaron (92 SE Auto) 23:32:48 11/08/2003 (0)
      • Trust me, I believe, I believe. It just took me a while to understand n/m - MIKE (93VE) 06:00:28 11/08/2003 (0)
  • Those are good results how are the trapspeeds? - Nismo87se (91 se-r) 04:03:29 11/08/2003 (1)
    • Hmm, good question... - Aaron (92 SE Auto) 23:24:53 11/08/2003 (0)
• Mr Gone--> - Matt K (01 2.5 RS) 19:17:33 11/07/2003 (0)
• Matt's Mod of the Week - Matt (93SE) 16:26:20 11/07/2003 (34)
  • Looks great Matt.... - Lordrandall (92se5) 23:59:32 11/08/2003 (0)
  • Ok you've been driving a day or two with these wheels - MIKE (93VE) 05:55:30 11/08/2003 (4)
    • Actually, I only put them on for the pics. --> - Matt (93SE) 10:23:33 11/08/2003 (3)
      • Based on Mustang wheel offsets, you should be okay then... - Bman (92 SE) 01:56:02 11/09/2003 (1)
        • I'm going to put some slicks/Azenis or something on my spare set now, yes. - Matt (93SE) 01:27:52 11/10/2003 (0)
      • lol..the joys of having the house to yourself during the day. nm - lophix (91se) 10:53:03 11/08/2003 (0)
  • you tucker.. lol nice, looked like the Borbet E's for a second...... OT; what kind/brand fogs are those nm - Maximan190 (VE 5sp) 01:54:25 11/08/2003 (1)
    • They're "OEM GXE fogs". smaller than the factory SE ones. me likes better than the frog eyes. :) nm - Matt (93SE) 10:24:22 11/08/2003 (0)
  • Question... - Mr. Rose (91 SE) 23:12:06 11/07/2003 (1)
    • Thanks Mista Rose... - Matt (93SE) 10:31:58 11/08/2003 (0)
  • Superb! - Mr. Rose (91' SE) 23:05:59 11/07/2003 (0)
  • Mmmm... Voxx MGRs! :) - Bman (92 SE) 19:18:54 11/07/2003 (1)
    • oops! --->> - Bman (92 SE) 19:20:05 11/07/2003 (0)
  • what the heck are you doing??>>> - Justin Mc (89se 90se (89GXE)) 18:49:02 11/07/2003 (1)
    • LOL dork. :) I'll keep my eyes out for something. what size you want? - Matt (93SE) 10:25:49 11/08/2003 (0)
  • umm isn't a "matt's mod of the week" supposed to be available for purchase or trade by us....?..... - lophix (91se) 17:57:23 11/07/2003 (9)
    • Umm, they are. I've got some 16x7" Enkeis, 17x8 MHT E-Tunes, OE SE and GXE wheels all for sale. ;) nm - Matt (93SE) 18:20:49 11/07/2003 (8)
      • what are mht e-tunes? trying to find a pic. nm - Walka (Black 92 GXE) 21:44:58 11/07/2003 (1)
        • Pic here--> - Matt (93SE) 22:38:59 11/07/2003 (0)
      • Hmm, how much for the SE's? - Bman (92 SE) 21:07:43 11/07/2003 (2)
        • They're straight. no curb rash, but they need refinished (peeling like almost all are at this point) Make reasonable offer. nm - Matt (93SE) 22:37:52 11/07/2003 (1)
          • Heheh, okay no thanks then. Peeling is my prob too n/m - Bman (92 SE) 00:01:49 11/09/2003 (0)
      • I'll take the MHT for a straight up trade :)....nm - KLoWnPR109 (89 GXE five speed) 18:35:17 11/07/2003 (0)
      • did you get the enkeis tightened? nm - lophix (91se) 18:33:07 11/07/2003 (1)
        • Not yet. gotta make a tool/socket for them. haven't had the desire yet. --> - Matt (93SE) 22:39:51 11/07/2003 (0)
  • I have always liked those but they are heavy right?...i figured you for a... - awsm66 (93SE) 17:16:05 11/07/2003 (1)
    • They are pretty heavy at 51lb each w/ tire (woah!), but they were the right price.. :) nm - Matt (93SE) 18:21:28 11/07/2003 (0)
  • Nice. Looks like 17x8s with 235s with 30-32 offsets n/m - Jeff92se (92se) 16:30:23 11/07/2003 (6)
    • Something like that, yes. they BARELY fit in the back. :) nm - Matt (93SE) 16:48:44 11/07/2003 (5)
      • What do you mean "something"? You don't know? BTW? - Jeff92se (92se) 16:54:27 11/07/2003 (4)
        • I forgot the offset earlier. they're 17x8, 32mm offset. nm - Matt (93SE) 18:22:12 11/07/2003 (2)
          • and 25lb each... 51lb with tire. (ugh!) nm - Matt (93SE) 18:22:35 11/07/2003 (1)
            • Holy baloney! Well they look great! hehe n/m - Jeff92se (92se) 18:33:29 11/07/2003 (0)
        • If they are 17x8 they are somewhere around 25 lbs n/m - Kaleb (Black '93 GXE 5spd) 17:35:43 11/07/2003 (0)
• I like it plain, easy to clean, and light... - Mr. Rose (91' SE) 15:08:31 11/07/2003 (3)
  • Those wheels would last 5 min. on my commute.... - Lordrandall (92se5) 23:50:17 11/08/2003 (0)
  • hey those are my wheels...or the ones I had picked out to get... - awsm66 (93SE ) 15:58:08 11/07/2003 (1)
    • I looked at those, but not a big fan. I gots ones I like better anyway. :) - Matt (93SE) 16:12:27 11/07/2003 (0)
• OT: well my deal fell through on the 68 Camaro I wanted but... - awsm66 (93SE) 11:55:43 11/07/2003 (10)
  • 68 camaro :drool: - Maximan190 (VE 5sp) 01:58:18 11/08/2003 (0)
  • WTF!!!??! I CALL BS!!!!! - DanNY (91SE) 13:35:08 11/07/2003 (6)
    • No I didnt give up the Camaro the guy backed out... - awsm66 (93SE ) 13:48:15 11/07/2003 (5)
      • That's Okay..now find a 302 Boss Mustang ;) nm - abdul (VE) 14:38:28 11/07/2003 (0)
      • "speed dents" = HAWTT!! damn flaky camaro owners =D nm - DanNY (91SE) 14:01:58 11/07/2003 (3)
        • yeah it kinda ticked me off but I think the only reason... - awsm66 (93SE) 14:20:16 11/07/2003 (2)
          • better go to year one and stock up on replacement parts now..LOL nm - DanNY (91SE) 14:29:37 11/07/2003 (1)
            • DOH!!! LOL nm. - awsm66 (93SE) 14:39:56 11/07/2003 (0)
  • I remember you talking about that car - «§» (93 SE) 12:37:54 11/07/2003 (0)
  • 30 psi?!? That is truly impressive. (if true) n/m - Pervis Anathema ('91 SE) 12:31:11 11/07/2003 (0)
• OT: Is it just me, or is the .org terminally slow --> - Pervis Anathema ('91 SE) 09:44:10 11/07/2003 (5)
  • The org has been terribly slow for about a week for me...that's with a t1 line. nm - Caleb (92 4 door) 15:35:51 11/07/2003 (0)
  • i thought it was just me! - Derrick (94 GXE) 10:19:54 11/07/2003 (0)
  • I don't understand... - DA-MAX (1990 Integra GS) 10:11:29 11/07/2003 (0)
  • Just the people that hang out there are slow. That's all. 3#-) n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 10:04:32 11/07/2003 (0)
  • I know it. It has been horrible lately. I wonder what is going on witeither the servers or new layout maybe. who knows. n/m - Kevin (93SE 5sp) 10:02:33 11/07/2003 (0)
• Hey Dan... I checked with my friend yesterday... the NOS setup is only 3 years old... and has been in storage for at least a year... n/m - Dark Lord Bunny (89 SE) 01:51:52 11/07/2003 (5)
  • hmmm..let me think about it..nm - DanNY (91SE) 09:03:43 11/07/2003 (4)
    • Re: hmmm..let me think about it..nm - Will (93 4dsc) 11:04:05 11/07/2003 (1)
      • no we beat the snot out of it from day 1..LOL - DanNY (91SE) 11:07:10 11/07/2003 (0)
    • You'd better think before buying something from a Dark Lord Bunny. n/m - Bryan (fmr 91,92 SE) 09:21:54 11/07/2003 (1)
      • And why do you say that??? n/m - Dark Lord Bunny (89 SE) 03:43:44 11/08/2003 (0)
• OT: Question about racing tranny mounts: solid/urethane? - Bman (92 SE) 22:33:10 11/06/2003 (5)
  • urethane if you ever want it to see street use... ever ridden >> - Justin Mc (89se 90se (89GXE)) 00:19:02 11/07/2003 (0)
  • there's a reason people use urethanes instead of just metal..i believe the motor has to move even if it is just a little bit.....nm - lophix (91se) 23:04:18 11/06/2003 (3)
    • yup...it still need to give/move. if it's metal it will crack/break off..nm - DanNY (91SE) 23:22:25 11/06/2003 (2)
      • Heheh, yeah, he's leaning towards urethane when I brought this issue up, but.... - Bman (92 SE) 23:54:43 11/06/2003 (1)
        • solid as in poly mounts..sure..nm - DanNY (91SE) 08:43:35 11/07/2003 (0)
• OT; Does anyone know a lot about audio/video, and S-video interferance..? --> - Brandon (90 gxe) 22:08:11 11/06/2003 (4)
  • Seems like an earth loop. Is the DVD player's mains plug 2 or 3 pin and what about the receiver? n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 09:42:30 11/07/2003 (0)
  • for some reason i had a buzz with my ps2 on my receiver too when using rcas... - lophix (91se) 00:57:12 11/07/2003 (0)
  • Welcome to my nightmare...ground loops... - Uncle Pete (89 SE) 00:54:18 11/07/2003 (0)
  • you're only supposed to use one or the other I thought...not both - Joel G. ('92 SE) 23:57:09 11/06/2003 (0)
• Please help... I'm installing my electric cutout and I can't find a place to route the wire inside the car --> - Aaron (92 SE Auto) 20:03:14 11/06/2003 (2)
  • anything around the shifter area? nm - Matt (93SE) 22:13:50 11/06/2003 (1)
    • I checked that... but it's okay now, I got it working --> - Aaron (92 SE Auto) 00:57:37 11/07/2003 (0)
• OT... Anyone else worked on Ford suspension before? - Matt (93SE) 19:35:18 11/06/2003 (8)
  • What year? Looks like things haven't changed much since 1968... n/m - MrGone (92SE) 04:25:02 11/07/2003 (1)
    • 97. nm - Matt (93SE) 10:15:15 11/07/2003 (0)
  • yeah...they didn't really designed their cars too well to work on..nm - DanNY (91SE) 21:00:35 11/06/2003 (4)
    • dont' get me started... hehe check this>> - Justin Mc (89se 90se (89GXE)) 22:51:30 11/06/2003 (3)
      • Terrible I say. We had to do the same for our auto teacher's '91 F-150 when we were in high school. n/m - Will (93 4dsc) 07:08:48 11/07/2003 (0)
      • yup... - DanNY (91SE) 23:49:53 11/06/2003 (1)
        • lol that's funny...fuel filter above the rear axle...means anyone in the know can cause some major "kick yee in da nuts!" - lophix (91se) 01:00:15 11/07/2003 (0)
  • more than a fair price when you look at the $/hr compared to stealership or anyone else nm - lophix (91se) 20:01:50 11/06/2003 (0)
• Parting out 1989 Maxima - Jason (1989 Maxima SE) 17:52:37 11/06/2003 (3)
  • I sent u email but u've never respond. :( - Chad ('89 SE) 15:26:07 11/07/2003 (1)
    • Re: I sent u email but u've never respond. :( - Jason (1989) 02:06:51 11/08/2003 (0)
  • Re: Parting out 1989 Maxima >> - Caleb ('92 SE) 19:32:10 11/06/2003 (0)
• Getting through the Bose - Patrick C. (92 GXE) 17:20:41 11/06/2003 (1)
  • 2 things you can do --> - John vdP (93SE) 18:13:55 11/06/2003 (0)
• I think I need a new KS. With the UDP on I reconnected the ks harness - Jeff92se (92se) 16:50:55 11/06/2003 (4)
  • Have fun! - Lordrandall (92se5) 16:59:15 11/06/2003 (3)
    • Thanks but I'm pretty familar with this engine now. ugh hehe - Jeff92se (92se) 17:01:59 11/06/2003 (2)
      • Oh I know you are.... - Lordrandall (92se5) 17:16:37 11/06/2003 (1)
        • 1 for vtcs/clutch/studs etc.. pulled the tranny AGAIN for the idiot key value clutch crap - Jeff92se (92se) 18:15:52 11/06/2003 (0)
• isn't it neat how the tach and speedo are parallel in 3rd gear? - mentat (93se 5spd) 16:46:25 11/06/2003 (3)
  • They aren't. Look closer Muahahahaha n/m - Kaleb (Black '93 GXE 5spd) 17:24:25 11/06/2003 (2)
    • WHY MUST YOU KILL MY DREAMS? *mostly* parallel!! at least til around 4k rpm. or whatever. go torture some kittens or something ;P n/m - mentat (93se 5spd) 17:59:12 11/06/2003 (1)
      • plus maybe VG is different? i dunno. dammit. n/m - mentat (93se 5s9) 23:29:47 11/06/2003 (0)
• Spacers, the final frontier. Any progress, Aaron?? nm - mentat (93se 5spd) 16:45:20 11/06/2003 (8)
  • I picked up a TB gasket a few days ago.... - Aaron (92 SE Auto) 18:36:19 11/06/2003 (7)
    • also, idea about resizing the ID of the spacer... - mentat (93se 5spd) 23:28:57 11/06/2003 (4)
      • Cool, no problem. Just to warn you, it will be 2 half inch spacers. You will have to epoxy them together. ... - Aaron (92 SE Auto) 01:04:43 11/07/2003 (3)
        • just gives me a reason to finally get a Dremel =) - mentat (93se 5spd) 08:46:00 11/07/2003 (2)
          • Oh yeah, little tip... don't get Dremel, get the Black and Decker dremel wanna be from Home Depot. Cheaper and nicer! n/m - Aaron (92 SE Auto) 16:17:10 11/07/2003 (0)
          • hmm... 1.5mm maybe. But I will see if I can change the ID on the computer. n/m - Aaron (92 SE Auto) 16:16:18 11/07/2003 (0)
    • sweet, more pics! also a sound clip would rule if someone could host it... n/m - mentat (93se 5spd) 22:40:50 11/06/2003 (1)
      • This cutout is just as loud as I expected.... - Aaron (92 SE Auto) 01:07:37 11/07/2003 (0)
• Wow.. i must be getting the worst gas mileage ever.. im at exactly half a tank at 100 miles.. - Brandon (90 gxe) 15:16:22 11/06/2003 (3)
  • I used to get 150 miles to a tank in my VE auto...nm - James (VE 5spd ) 18:27:49 11/06/2003 (1)
    • You still using my old clutch parts? And why are you not going - Jeff92se (92se) 18:30:04 11/06/2003 (0)
  • yup..join the club..nm - DanNY (91SE) 16:23:19 11/06/2003 (0)
• WOOT. Got into the Walt Disney World College program and paid internship! Just thought Id share :) n/m - Kevin (93SE 5sp) 14:52:33 11/06/2003 (2)
  • i've heard some horror stories about them... - mentat (93se 5spd) 15:11:26 11/06/2003 (0)
  • Congratulations! :) nm - Lordrandall (92se5) 14:57:24 11/06/2003 (0)
• Sorry for the OT >> - Albert ('97gxe) 14:46:51 11/06/2003 (1)
  • www.car-part.com - Lordrandall (92se5) 14:49:11 11/06/2003 (0)
• OT: Celica crap again - Jacob ('03 WRX) 13:41:18 11/06/2003 (9)
  • time for one of those JDM 2 liters with factory Mikuni side drafts! n/m - Jeff92se (92se) 16:06:34 11/06/2003 (3)
    • Ya.. I was heading that way but decided on.. - Jacob ('03 WRX) 18:50:52 11/06/2003 (2)
      • Hmmmmm I was just thinking. Toyota offered a 20 or 22r turbo right? - Jeff92se (92se) 19:05:47 11/06/2003 (1)
        • You probably know but - Jeff92se (92se) 19:09:29 11/06/2003 (0)
  • sounds nice, what's next? - «§» (93 SE) 15:59:54 11/06/2003 (2)
    • Hmm.. Reliability? - Jacob ('03 WRX) 18:42:08 11/06/2003 (1)
      • Hahaha.. ME SO MANY TOOPID. - Jacob ('03 WRX) 18:42:55 11/06/2003 (0)
  • Good to hear it's back on solid ground Jacob! :) nm - Lordrandall (92se5) 14:10:34 11/06/2003 (1)
    • It was on jackstands so long, I was worried about someone leaning on it and knocking it over.. ;) nm - Jacob ('03 WRX) 18:51:44 11/06/2003 (0)
• will the fifth gen se steering wheel fit on our maxima's? n/m - Derrick (94 GXE) 11:20:14 11/06/2003 (10)
  • You have an airbag? The 5-gen one definately will - Jeff92se (92se) 12:20:48 11/06/2003 (9)
    • wait i'm confused... so this is a no no? or is it okay? n/m - Derrick Ho (94 GXE) 16:51:20 11/06/2003 (2)
      • Derrick, first find out if it will bolt on or not.... - Lordrandall (92se5) 16:57:53 11/06/2003 (1)
        • well... aftermarket is nice i guess - Derrick (94 GXE) 17:15:16 11/06/2003 (0)
    • What? You said it definately will, and then you said "I'd really wouldn't be swapping". Do you know that the 5th Gen wheel will bolt up? n/m - Kaleb (Black '93 GXE 5spd) 12:46:57 11/06/2003 (5)
      • Airbag, 3-gen got it? Because the 5-gen will definately have one. Context thing n/m - Jeff92se (92se) 12:51:44 11/06/2003 (4)
        • So, I can put a 5-gen steering wheel on my car? Because I'd like to do that, and if you know I can, I'd be thankful. n/m - Kaleb (Black '93 GXE 5spd) 13:38:37 11/06/2003 (3)
          • kaleb, you sound very excited!! This sounds good. I wondered about... - lophix (91se) 13:45:49 11/06/2003 (0)
          • He means the 5th gen wheel "definitely will have an airbag". Not "Definitely will fit on a 3rd gen" n/m - RosenKen (93 SE 5spd) 13:43:43 11/06/2003 (1)
            • LOL, ohhhhhh! You work for Clarica right? ;) n/m - Bman (92 SE) 22:27:32 11/06/2003 (0)
• Breaking in a motor... - Will (93 4dsc) 10:56:51 11/06/2003 (8)
  • Especially on a re-build, ---> - John vdP (93SE) 18:26:02 11/06/2003 (2)
    • Thanks.... - Will (93 4dsc) 07:12:16 11/07/2003 (0)
    • ...really hard to do...makes you just want to plant it especially in weather like this (30s) nm - lophix (91se) 01:04:36 11/07/2003 (0)
  • With the advent of modern fuel injection and ignition management - Jeff92se (92se) 11:07:29 11/06/2003 (4)
    • You're supposed to change oil in cars?? Dang, I never changed the oil in my Maxima. :) n/m - Matt (02 WRX / 96ZJ) 12:43:09 11/06/2003 (2)
      • LOL! Grrrr! Like I never put $ into my checking account! hehe n/m - Jeff92se (92se) 15:39:56 11/06/2003 (0)
      • Oh Snap! - Lordrandall (92se5) 13:14:38 11/06/2003 (0)
    • and don't forget ... - Joel G. ('92 SE) 11:32:48 11/06/2003 (0)
• What' the site that show you a exploded view of the susp, brake, sterring, etc. system. Need to check out something on the 4th gens. Chilton on-line or something like that n/m - MIKE (93VE) 10:19:51 11/06/2003 (4)
  • What you need to know? nm - Matt (93SE) 11:27:45 11/06/2003 (1)
    • I'm trying to see the similarity or dis-similarity between their brake set-up and ours. More importantly the rear caliper bracket n/m - MIKE (93VE) 12:40:04 11/06/2003 (0)
  • Chilton's Online.... - «§» (93 SE) 10:34:06 11/06/2003 (1)
    • Bookmark, thanks - MIKE (93VE) 12:38:09 11/06/2003 (0)
• O/T The power of internet forums... - jewellboy (91SE(gone, but still in the family)) 09:39:02 11/06/2003 (4)
  • I did something similar with the prick who tried to sue me for the injectors he misinformed me about. Maybe I should make a t-shirt 3#-) n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 10:01:16 11/06/2003 (0)
  • Before I click, let me guess... Mark Mitsubishi? n/m - Pervis Anathema ('91 SE) 09:59:12 11/06/2003 (2)
    • Re: Before I click, let me guess... Mark Mitsubishi? n/m - jewellboy (91 SE (gone, but still in the family)) 10:05:05 11/06/2003 (1)
      • It was a cool thread. Mark Mitsubishi got owned. n/m - Pervis Anathema ('91 SE) 11:38:28 11/06/2003 (0)
• G35 coupe 18" wheel offset? n/m - Mr. Rose (91 SE) 05:11:25 11/06/2003 (9)
  • Run 4 fronts Mr. Rose--> - Jeff92se (92se) 11:08:42 11/06/2003 (0)
  • lookie inside--> - Kevin (93SE 5sp) 09:39:12 11/06/2003 (5)
    • heres more - Kevin (93SE 5sp) 09:44:57 11/06/2003 (4)
      • even more :) - Kevin (93SE 5sp) 09:46:17 11/06/2003 (3)
        • Thanks! Here is what I trying to do... - Mr. Rose (91' SE) 11:27:05 11/06/2003 (2)
          • Your gonna replace the oem 18s with Rota 18s? - Jeff92se (92se) 11:56:14 11/06/2003 (1)
            • g35 Sedan, sorry. n/m - Mr. Rose (91' SE) 13:10:04 11/06/2003 (0)
  • shoot can remember which it is/was...check g35driver.com nm - lophix (91se) 09:08:40 11/06/2003 (1)
    • I did, the server was down. help. n/m Thanks! - Mr. Rose (91' SE) 09:21:58 11/06/2003 (0)
• Dinan Ecu: Installed. Holy Crap! --> - Pervis Anathema ('91 SE) 00:11:54 11/06/2003 (13)
  • YOU'RE WELCOME! - Jason F (90SE) 08:12:44 11/06/2003 (0)
  • Are there any Dinan ECU applications for the VE? n/m - Seamax (93 SE) 01:41:56 11/06/2003 (3)
    • Nope and they dont even make the VG ECU anymore, haven't in many years....... - 8ball (89 SE 5spd) 01:47:06 11/06/2003 (2)
      • Isnt Dinan getting sued out the wazoo? nm - James (VE 5spd ) 01:47:56 11/06/2003 (1)
        • haven't heard anything about it, they just do all BMW stuff now. - 8ball (89 SE 5spd) 01:49:18 11/06/2003 (0)
  • Cool...you're one of the few(if not only) to have a Dinan... - DA-MAX (1990 Integra GS ) 00:38:46 11/06/2003 (5)
    • Everything I heard and read rated it better..... - 8ball (89 SE 5spd) 01:07:31 11/06/2003 (3)
      • Sir. I do NOT envy you (heator core replacement) n/m - Jeff92se (92se) 01:09:08 11/06/2003 (2)
        • Oh I know, no one envies me. LOL. It's gonna suck - 8ball (89 SE 5spd) 01:34:12 11/06/2003 (1)
          • It's scary, but it's not that bad... - Uncle Pete (89 SE) 02:31:28 11/06/2003 (0)
    • When I make it back to the dyno, I will be sure and post the runs. n/m - Pervis Anathema ('91 SE) 00:43:28 11/06/2003 (0)
  • so THATS why you wanted to go to atl so bad :).... - lophix (91se) 00:35:53 11/06/2003 (1)
    • ~5900 rpm. The main difference is in the middle of the powerband. n/m - Pervis Anathema ('91 SE) 00:42:22 11/06/2003 (0)
• Auto VE upper and lower intake manifold +TB and OEM VE exhaust manifolds - MIKE (93VE) 17:25:10 11/05/2003 (2)
  • Why are you selling this? Are these extras? Or do you have VI now? n/m - Aaron (92 SE Auto) 00:42:40 11/06/2003 (1)
    • No VI yet, just extras taking up space. From the looks of it I think these will be on eBay n/m - MIKE (93VE) 09:21:29 11/06/2003 (0)
• Anybody want some mudflaps or DIY pop-charger?.. - James (VE 5spd ) 17:00:53 11/05/2003 (1)
  • James, I'd be interested in the mudflaps. I'll shoot you an email. n/m - unsigned (92SE/89GXE) 22:25:37 11/05/2003 (0)
• I took a trip this past weekend.. - James (VE 5spd ) 15:11:48 11/05/2003 (6)
  • think that's cool? --> - lophix (91se) 23:05:17 11/05/2003 (1)
    • I'll have to see what mine's like so you guys will know what to look foward to if you cam yours out........ - 8ball (89 SE 5spd) 01:36:26 11/06/2003 (0)
  • Re: I took a trip this past weekend.. - maximajism94se (94se auto) 21:58:17 11/05/2003 (1)
    • It's by far the best mileage I've ever gotten.. - James (VE 5spd ) 22:46:22 11/05/2003 (0)
  • :this is worthless without pics: ........of her of course :P. Awesome mileage. n/m - Kevin (93SE 5sp) 15:21:05 11/05/2003 (1)
    • :wall:... anyway nice james; best ive ever gotten was about 310 semi-highway nm - Maximan190 (VE 5sp) 22:02:32 11/05/2003 (0)
• Please, I need help right now --> - Pervis Anathema ('91 SE Auto) 15:11:09 11/05/2003 (2)
  • Fu*$%@ Chilton's manual. Never mentioned the procedure was for a VE. n/m - Pervis Anathema ('91 SE) 00:04:41 11/06/2003 (0)
  • perhaps check the connect and see if you're getting power there? nm - DanNY (91SE) 15:40:46 11/05/2003 (0)
• Impact wrench reccomendation (more) - Matt (02 WRX / 96ZJ) 14:45:01 11/05/2003 (18)
  • Go electric! :D (puts on flame suit) n/m - Bman (92 SE) 21:20:31 11/05/2003 (0)
  • pics and specs... - awsm66 (93SE) 15:12:08 11/05/2003 (5)
    • IR2131..but it's a little more $ but very strong.. - DanNY (91SE) 15:39:18 11/05/2003 (4)
      • The IR sounds good, but $180 is a bit more than I was looking to spend. :) n/m - Matt (02 WRX / 96ZJ) 18:42:27 11/05/2003 (2)
        • Believe me, you'll REALLY wish you spent it when you can't get an axle nut off! --> - Matt (93SE) 20:35:23 11/05/2003 (1)
          • I got the axle nuts off of my maxima and off of a 626... - awsm66 (93SE) 20:59:33 11/05/2003 (0)
      • yup i da suck..nm - DanNY (91SE) 15:39:41 11/05/2003 (0)
  • Matt has a 1/2" Craftsman gun that worked well... - Lordrandall (92se5) 15:02:37 11/05/2003 (4)
    • Hey Matt York, that gun is for sale right now.... - Lordrandall (92se5) 00:04:00 11/06/2003 (0)
    • here's the one I have.. love it. --> - Matt (93SE) 20:33:35 11/05/2003 (0)
    • I have the same one.. That one is made by IR n/m - John vdP (93SE) 17:15:45 11/05/2003 (0)
    • I was just looking at that one. Seems like its good for the price. n/m - Kevin (93sE 5sp) 15:19:18 11/05/2003 (0)
  • I have a pretty nice (and powerful) one for sale nib... - awsm66 (93SE) 14:58:20 11/05/2003 (4)
    • btw. Jeff, any reviews on the wrench? n/m - Matt (02 WRX / 96ZJ) 18:41:13 11/05/2003 (2)
      • yeah what do you think of it... - awsm66 (93SE) 20:04:37 11/05/2003 (1)
        • Uh... I haven't even used it yet. My dad's gun is a POS, so I'll just give this one - Jeff92se (92se) 00:51:14 11/06/2003 (0)
    • Sounds great, you've got mail. n/m - Matt (02 WRX / 96 ZJ) 18:39:36 11/05/2003 (0)
  • I know awsm66 had one or two for sale recently - «§» (93 SE) 14:55:28 11/05/2003 (0)
• Sputtering under acceleration....and other problems...long, sorry... - J (92 SEauto) 13:14:18 11/05/2003 (2)
  • intake taking in too much air??? uh.. - Derrick (94 GXE) 14:12:20 11/05/2003 (1)
    • yeeaahh, thats what I had said as well.... - J (92 SEauto) 22:48:49 11/05/2003 (0)
• Base Timing Mode on the ECM. Which mode is it and ... - portdave (93seauto) 07:49:46 11/05/2003 (0)
• this might seem like a weird q, but i'll ask anyway..... - lophix (91se) 01:46:11 11/05/2003 (9)
  • thanks for the info guys....... - lophix (91se) 13:22:22 11/05/2003 (2)
    • I might be massively oversimplifying here, but... - Uncle Pete (89 SE) 16:03:38 11/05/2003 (1)
      • true...so the right combination would be skinny, low profile tires... - lophix (91se) 19:21:44 11/05/2003 (0)
  • Re: this might seem like a weird q, but i'll ask anyway..... - Nighty93MaxSE (93 Max SE 5spd) 11:29:07 11/05/2003 (0)
  • cars like the max don't usually flip unless they're "tripped" - Matt K (01 2.5 RS) 07:54:48 11/05/2003 (0)
  • Re: this might seem like a weird q, but i'll ask anyway..... - Albert ('97gxe) 06:50:31 11/05/2003 (0)
  • I can tell you what happens when you do that on dirt tho :p - Dark Lord Bunny (89 SE) 04:48:11 11/05/2003 (0)
  • Hmm, I can try and see what happens :) n/m - 8ball (89 SE 5spd) 02:54:58 11/05/2003 (0)
  • you know.. - Walka (Black 92 GXE) 02:17:35 11/05/2003 (0)
• 89-94 Maxima Digital Dash Repair - Tom (Maxima) 22:58:21 11/04/2003 (15)
  • holy crap..if you're going to spam at least give people some discounts..nm - DanNY (91SE) 08:35:30 11/05/2003 (0)
  • $89 to fix a clock? Dude, we're a lot smarter than that. (sings) You can eat our ass and balls! n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 06:16:49 11/05/2003 (2)
    • Hahahahaha! n/m - Will (93 4dsc) 10:35:11 11/05/2003 (0)
    • WTF?! $89 to solder a few joints back together? I've fixed them for less than half that for years. nm - Matt (93SE) 08:40:13 11/05/2003 (0)
  • Re: 89-94 Maxima Digital Dash Repair - Tom (Maxima) 23:23:54 11/04/2003 (6)
    • No, but there are no popups or banner ads on this board for a reason. we don't want it. this is discussion space, not advertising. - Matt (93SE) 23:37:41 11/04/2003 (5)
      • Didnt WSP Dan used to? nm - James (VE 5spd ) 23:46:40 11/04/2003 (2)
        • Yes but he also took input and gave updates on product development, if this guy's post was --> - Kaleb (Black '93 GXE 5spd) 23:53:37 11/04/2003 (0)
        • We asked him to stop too. nm - Matt (93SE) 23:50:44 11/04/2003 (0)
      • Re: No, but there are no popups or banner ads on this board for a reason. we don't want it. this is discussion space, not advertising. - Tom (Maxima) 23:45:22 11/04/2003 (1)
        • Tom, we try to keep advertisements off of this board (more) - Administrator (Maxima) 13:05:36 11/05/2003 (0)
  • Spam is not welcome here - Spam is not welcome here (Spam is not welcome here) 23:00:10 11/04/2003 (3)
    • I'm confused - MIKE (93VE) 23:16:11 11/04/2003 (2)
      • In this case, I'd consider it Spam. it's an obvious advertisement, unsolicited by us. This board was targeted simply because it's a Maxima site. They're simply looking for free advertising. nm - Matt (93SE) 23:20:01 11/04/2003 (1)
        • It also has that "spam-like" format to it, which doesn't look good... n/m - Bman (92 SE) 23:48:25 11/04/2003 (0)
• "Hood Shocks" - BlackMax ('91 GXE) 21:43:40 11/04/2003 (2)
  • The worst you'll run in to (for some) is the need to drill out the bolt hole on the hood bracket n/m - John vdP (93SE) 17:18:25 11/05/2003 (0)
  • should be simple...nm - DanNY (91SE) 21:57:07 11/04/2003 (0)
• Is it me or is the Dot down, just when I need to do some homework n/m - MIKE (93VE) 21:00:17 11/04/2003 (1)
  • Nevermind it was me maxima.Dot.org n/m - MIKE (93VE) 21:52:14 11/04/2003 (0)
• Yuck - Caleb ('92 SE) 20:30:26 11/04/2003 (7)
  • you can buy all the parts yourself and use premium stuff and save $200 over that quote. - Matt (93SE) 22:23:06 11/04/2003 (2)
    • Thanks for all the responses...Matt>> - Caleb ('92 SE) 00:23:33 11/05/2003 (1)
      • ha, nevermind, found them..thanks dude.nm - Caleb ('92 SE) 00:35:24 11/05/2003 (0)
  • Hmmm.... - NicZ (93SE 89GXE ) 21:56:00 11/04/2003 (2)
    • I already need the shaft i guess, so - Caleb ('92 SE) 22:04:46 11/04/2003 (1)
      • You should be fine, in fact... - NicZ (93SE 89GXE ) 22:41:02 11/04/2003 (0)
  • Re: Yuck - Tim (93se5sp) 21:44:21 11/04/2003 (0)
• Generally who's cheaper FedX or UPS abd what yrs were the Z31? n/m - MIKE (93VE) 19:30:58 11/04/2003 (6)
  • So they're both generally the same, give or take. Thanks n/m - MIKE (93VE) 20:37:13 11/04/2003 (0)
  • I have found recently that FEDEX ground was about 1/3 less than UPS n/m - portdave (93seauto) 19:38:27 11/04/2003 (0)
  • you can get online quotes for both - «§» (93 SE) 19:36:13 11/04/2003 (1)
    • Re: you can get online quotes for both - James (VE 5spd ) 19:51:03 11/04/2003 (0)
  • I hear FedEx is cheaper for ground and ... - Aaron (92 SE Auto) 19:34:14 11/04/2003 (1)
    • I suck... 84-89 300ZX(z31) taken from the FAQs at z31.com n/m - Aaron (92 SE Auto) 19:34:53 11/04/2003 (0)
• Welding Gurus----> - dmontzsta (92 SE) 18:39:18 11/04/2003 (2)
  • if you have a welder why take it to a shop?? - DA-MAX (1990 Integra GS) 18:49:59 11/04/2003 (1)
    • heres a good thread on welding too, if you got time.... - DA-MAX (1990 Intgera GS) 18:52:52 11/04/2003 (0)
• I'm gonna pick me up some speed bleeders for the brakes after work today. Thanks. n/m - Kaleb (Black '93 GXE 5spd) 16:08:26 11/04/2003 (1)
  • You go girl - Lordrandall (92se5) 16:39:26 11/04/2003 (0)
• help, headlight, daytime driving light going weird. - kev (94se) 12:05:14 11/04/2003 (0)
• ABS guys, do you know what your coolant overflow tank mounts to? Thanks! n/m - Kaleb (Black '93 GXE 5spd) 10:17:28 11/04/2003 (9)
  • Yes..there is an "ear" that it slides on off the battery post nm. - abdul (VE) 10:42:27 11/04/2003 (7)
    • Battery has two long threaded hold down rods --> - John vdP (93SE) 13:32:07 11/04/2003 (6)
      • And John, the parts car is not gone yet. I have the title but I'm waiting for transport. --> - Kaleb (Black '93 GXE 5spd) 14:33:25 11/04/2003 (0)
      • The problem is the hold-down rods (that the nuts thread onto) are the SAME ABS or not, so I don't know what the deal is. n/m - Kaleb (Black '93 GXE 5spd) 14:32:10 11/04/2003 (4)
        • Kaleb: Comms emerge from the black hole ! 8-) Want me to e-mail you a pic? n/m - John vdP (93SE) 18:05:10 11/04/2003 (0)
        • I think the mounting plate is separate... - Uncle Pete (89 SE) 15:15:05 11/04/2003 (1)
          • A customer asked for one and I can't find it. I find the non-abs bracket no problem. n/m - Kaleb (Black '93 GXE 5spd) 15:20:29 11/04/2003 (0)
        • what about the tie down bracket that goes between the long rods? - Matt (93SE) 15:07:04 11/04/2003 (0)
  • battery post..no? nm - DanNY (91SE) 10:37:15 11/04/2003 (0)
• Great running 95 5sp only $2850 - ivolley (95SE 5speed) 07:56:28 11/04/2003 (0)
• DanNY >> - Albert ('97gxe) 06:46:57 11/04/2003 (5)
  • you're asking me to predict the future? - DanNY (91SE) 09:01:14 11/04/2003 (4)
    • Re: you're asking me to predict the future? - Albert ('97gxe) 14:45:47 11/04/2003 (3)
      • u have fed or CA emissions? i didn't think u had precats.. - DanNY (91SE) 15:41:19 11/04/2003 (0)
      • I want to go to that shop in LI. It'll be worth the cost to get it all repaired. nm - Albert ('97gxe) 14:47:19 11/04/2003 (1)
        • your call boss...whatever u want to do..nm - DanNY (91SE) 15:41:39 11/04/2003 (0)
• Suspension Troubles - Jacques (M3 4door 3.2) 03:18:54 11/04/2003 (3)
  • Try a Bimmer forum like bimmerforums.com or Roadfly maybe n/m - Bman (92 SE) 18:46:11 11/04/2003 (0)
  • Sagging or broken coil spring? n/m - John vdP (93SE) 13:34:20 11/04/2003 (0)
  • If this was a BMW forum and not a Nissan one, perhaps. Go to a suspension shop ... at least springs or shocks have issues. n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 04:10:59 11/04/2003 (0)
• Project Max PSI progress report (short): Turbo can and will be mounted down low. Custom y-pipe and mounting bars in progress! n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 02:25:51 11/04/2003 (4)
  • how low? like on the x-member? nm - DanNY (91SE) 09:40:27 11/04/2003 (0)
  • Oh yeah, and turbo exhaust housing will be ceramic coated. n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 05:31:43 11/04/2003 (2)
    • nice!! gonna get pics for us sometime? :) nm - lophix (91se) 08:50:27 11/04/2003 (1)
      • When I pick it up from the exhaust joint, yeah. n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 14:26:11 11/04/2003 (0)
• Spoiler - Patrick C. (92 GXE) 22:43:17 11/03/2003 (1)
  • I have a Stillen type II that I like... - awsm66 (93SE) 17:24:49 11/04/2003 (0)
• FS: Dinan ECU for VG's - Jason F (90SE) 22:40:06 11/03/2003 (6)
  • The Dinan ECU is SOLD! n/m - Jason F (90SE) 07:02:51 11/05/2003 (1)
    • :( n/m - unsigned (92SE/89GXE) 07:49:11 11/05/2003 (0)
  • I can't believe you VG guys aren't all over this. :-/ nm - Lordrandall (92se5) 15:47:42 11/04/2003 (2)
    • I sent jason an eMail about 7:30 central this morning... I've yet to hear back. He must have a life :D n/m - unsigned (92SE/89GXE) 18:43:57 11/04/2003 (0)
    • i know. this is like the best deal i've seen this year yet. impossible to find ecu too!!nm - lophix (91se) 17:30:58 11/04/2003 (0)
  • If you're in the Atlanta area we can do the swap face-to-face. n/m - Jason F (90SE) 22:40:43 11/03/2003 (0)
• OT: Took advantage of the 80 degree weather up here in the Northeast, pics---> - Kevin (93SE 5sp) 20:18:34 11/03/2003 (4)
  • So where's your sister? She hot? :) nm - Matt (93SE) 21:08:02 11/03/2003 (2)
    • how is what's her name....Kelly? LOL nm - DanNY (91SE) 21:32:26 11/03/2003 (1)
      • Just askin for the rest of the single guys here! ;) nm - Matt (93SE) 22:40:19 11/03/2003 (0)
  • Nice! Getting out on a river is a blast... - Caleb ('92 SE) 20:48:02 11/03/2003 (0)
• D.I.Y. TIG Welder... - JerryT (91SE) 19:46:54 11/03/2003 (3)
  • Oh, very cool! Thanks Jerry. :) nm - Lordrandall (92se5) 10:47:21 11/04/2003 (0)
  • TIG welds are usually cleaner than MIG..unless you're REAL good..nm - DanNY (91SE) 20:34:46 11/03/2003 (0)
  • Amazing! I have a mig already though. But wow n/m - Jeff92se (92se) 19:55:22 11/03/2003 (0)
• hesitation problems - 12vmax (93 gxe) 18:11:52 11/03/2003 (0)
• anyone have a 92-94SE tailight laying around? nm - DanNY (91SE) 14:30:04 11/03/2003 (4)
  • Yo I have the ENTIRE 93 GXE setup for sale, it's da bomb! n/m - Kaleb (Black '93 GXE 5spd) 16:20:36 11/03/2003 (0)
  • no, but I still have a GXE light left. :) nm - Matt (93SE) 15:19:22 11/03/2003 (2)
    • what yr was your GXE goober? nm - DanNY (91SE) 15:47:45 11/03/2003 (1)
      • 93. - Matt (93SE) 16:02:04 11/03/2003 (0)
• For those of you offended by my nitrous is cheating statement... - KLoWnPR109 (89 GXE five speed) 10:20:54 11/03/2003 (2)
  • Doh, we need an edit or delete option....nm - KLoWnPR109 (89 GXE five speed) 10:21:38 11/03/2003 (1)
    • Jooo suck at the internet!! :P Get that baby installed and give us some feed back. n/m - Kevin (93SE 5sp) 14:08:51 11/03/2003 (0)
• For those of you offended by my nitrous is cheating statement... - KLoWnPR109 (89 GXE five speed) 10:20:36 11/03/2003 (0)
• Matt.. thanks for the PM info.. - SeaMAX (93 SE) 00:58:58 11/03/2003 (0)
• Friend with G20 is looking to ditch his 75 shot dry NOS system... any interested??? - Dark Lord Bunny (89 SE) 23:49:49 11/02/2003 (7)
  • condition of tank and related components? age? nm - DanNY (91SE) 12:08:10 11/03/2003 (3)
    • I'm not sure on exact age... he's had it for a while... It hasn't been used tooo frequently as he had it on a sponsored car so it was basically show... I'll ask and let you know ASAP n/m - Dark Lord Bunny (89 SE) 23:07:32 11/03/2003 (2)
      • grazzy-azz..nm - DanNY (91SE) 09:01:53 11/04/2003 (1)
        • Asked him at work today... 3years old he says... n/m - Dark Lord Bunny (89 SE) 01:21:12 11/06/2003 (0)
  • Bah, who wants nitrous. Everybody knows that its just cheating....nm - KLoWnPR109 (89 GXE five speed) 00:34:39 11/03/2003 (2)
    • Then call me a 3 year long cheater. Son, horsepower is still horsepower at the end of the day. n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 02:37:54 11/03/2003 (0)
    • Some people do... don't judge... n/m - Dark Lord Bunny (89 SE) 01:03:27 11/03/2003 (0)
• OT: Newest addition to household --> - lophix (91se) 22:04:17 11/02/2003 (7)
  • Can't see the pics, so I'll post my own ===>> - KLoWnPR109 (89 GXE five speed) 10:41:20 11/03/2003 (3)
    • looks like a dog - MrGone (92se) 01:41:43 11/06/2003 (0)
    • big guy...is that a male?--> - lophix (91se) 11:32:28 11/03/2003 (1)
      • Its a female, only 45 pounds though. She's only 6.5 months old...nm - KLoWnPR109 (89 GXE five speed) 12:02:55 11/03/2003 (0)
  • niceee new security system =D ..nm - DanNY (91SE) 08:34:18 11/03/2003 (0)
  • Gonna be a big guy! nm - Matt (93SE) 22:21:21 11/02/2003 (0)
  • last pic is of his dad...he's really forlorn and homesick right now,.. - lophix (91se) 22:11:47 11/02/2003 (0)
• New way of taking the water pump off. - dmontzsta (92 SE) 20:01:36 11/02/2003 (4)
  • You did this yourself? Out the top of the motor? n/m - Aaron (92 SE Auto) 20:05:44 11/02/2003 (3)
    • Me and my dad, the easiest was down the bottom. n/m - dmontzsta (92 SE) 20:13:17 11/02/2003 (2)
      • Sweet man ... - Aaron (92 SE Auto) 20:41:29 11/02/2003 (1)
        • Re: Sweet man ... - dmontzsta (92 SE) 21:50:02 11/02/2003 (0)
• exhaust update, one more piece of advice needed --> - Walka (Black 92 GXE) 17:42:11 11/02/2003 (2)
  • You can get the same one as WSP for cheaper--> - Tim (93se5sp) 22:17:25 11/02/2003 (0)
  • Holy Crap, that is some serious rust! When I did my exhaust, ---> - Pervis Anathema ('91 SE) 18:39:14 11/02/2003 (0)
• OT: Need advice, car related...... - Mike S. (93gxe) 17:28:14 11/02/2003 (3)
  • since my car is parked at my parents in NJ and I'm in nyc... - Joel G. ('92 SE) 19:59:41 11/02/2003 (0)
  • My step-grandma used to drive my 89 when she was visiting.... - NicZ (93SE 89GXE ) 19:23:19 11/02/2003 (0)
  • This is a easy one - MIKE (93VE) 18:20:56 11/02/2003 (0)
• Parting out 89 Maxima SE 5 speed - Jason (89 SE 5 speed) 17:10:40 11/02/2003 (3)
  • email sent!! - Chad ('89 SE) 14:09:01 11/04/2003 (0)
  • Does it have ABS? n/m - RosenKen (93 SE 5spd) 07:06:00 11/03/2003 (0)
  • Randy has dibs on the rear caliper brackets! nm - Matt (93SE) 20:44:58 11/02/2003 (0)
• NISSAN related pictures... - Mr. Rose (91' SE) 15:38:36 11/02/2003 (6)
  • oops.. - Mr. Rose (91 Se) 15:39:32 11/02/2003 (5)
    • I knew I shoulda bought those HRE wheels when I had the chance! :( nm - Matt (93SE) 20:54:09 11/02/2003 (0)
    • Oh look, it's a 4 door 350Z. Nice, but a big mistake if all their cars will look like this now. n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 18:41:07 11/02/2003 (2)
      • I disagree... I think the G35's are what happens when the (mostly ugly) new Nissan styling actually looks good. too bad about the maxima though. and the Z for that matter. n/m - mentat (93se 5spd) 19:17:23 11/02/2003 (0)
      • I disagree... I think the G35's are what happens when the (mostly ugly) new Nissan styling actually looks good. too bad about the maxima though. and the Z for that matter. n/m - mentat (93se 5spd) 18:54:49 11/02/2003 (0)
    • damn the coupe rims looks sweeet on the sedan! love that car!!! - Brandon (90 gxe) 17:06:19 11/02/2003 (0)
• Whoops --> - Kaleb (Black '93 GXE 5spd) 13:18:35 11/02/2003 (6)
  • Sorry.. typing with mechaniox gloves on is fun ;) nm, - Matt (93SE) 16:19:59 11/02/2003 (0)
  • Is that new p0artr rubbing on the Y pipe under the car? nm - MAtt (93SE) 16:19:22 11/02/2003 (1)
    • No not at all when it was installed. n/m - Kaleb (Black '93 GXE 5spd) 09:12:38 11/03/2003 (0)
  • I've got the same... - Mike S. (93gxe) 14:01:10 11/02/2003 (1)
    • Well I get to build a custom down pipe when the turbo is installed so hopefully it'll hold out. n/m - Kaleb (Black '93 GXE 5spd) 14:41:24 11/02/2003 (0)
  • Survey says: Flex pipe n/m - MIKE (93VE) 13:27:13 11/02/2003 (0)
• Car stereo update..... - Mike S. (93gxe) 10:14:17 11/02/2003 (2)
  • Yup.. I've had that rear amp bypass up for years now, but lotsa people don't think about it when they're installing a new deck. nm - Matt (93SE) 12:44:56 11/02/2003 (0)
  • Cool --> - Kaleb (Black '93 GXE 5spd) 12:13:36 11/02/2003 (0)
• JWT ECU = :) and ...===>>> - KLoWnPR109 (89 GXE five speed) 22:58:41 11/01/2003 (4)
  • never had that issue with mine and jwt - Joel G. ('92 SE) 15:09:41 11/02/2003 (0)
  • you like a lot paul? nm - lophix (91se) 23:08:39 11/01/2003 (2)
    • I will a lot better once the CE light goes off and I can make use of the extra daughterboard :wall:....nm - KLoWnPR109 (89 GXE five speed) 23:13:51 11/01/2003 (1)
      • Mmm :wall: I like that. .. - Aaron (92 SE Auto) 23:29:38 11/01/2003 (0)
• Brake bracket and UDP - Jeff92se (92se) 22:48:16 11/01/2003 (9)
  • About the brackets - MIKE (93Ve) 00:01:19 11/02/2003 (2)
    • Re: About the brackets - Jeff92se (92se) 00:22:46 11/02/2003 (1)
      • Sounds good, couple more questions - MIKE (93VE) 13:25:45 11/02/2003 (0)
  • Yeah, I would also like to know... - Aaron (92 SE Auto) 22:55:24 11/01/2003 (5)
    • I've removed my UDP - MIKE (93VE) 23:46:55 11/01/2003 (4)
      • How did you enlarge the ID? Dremel tool? n/m - Aaron (92 SE Auto) 23:52:13 11/01/2003 (3)
        • What didn't I use - MIKE (93VE) 00:05:10 11/02/2003 (2)
          • I think that's what Craig had to do too. n/m - Aaron (92 SE Auto) 00:20:44 11/02/2003 (1)
            • I just put my ASP UDP on last week and I had to... - portdave (93seauto) 14:23:19 11/02/2003 (0)
• I have pics of my new McCord Power Plate electric cutout and I just filled my motor and tranny mounts ---> - Aaron (92 SE Auto) 22:02:12 11/01/2003 (11)
  • Question about your power plate - MIKE (93VE) 00:18:26 11/02/2003 (1)
    • Yeap ... - Aaron (92 SE Auto) 00:32:34 11/02/2003 (0)
  • Nice!!! whats the time it takes to fully open? nm - DA-MAX (1990 Intgera) 00:13:19 11/02/2003 (1)
    • The website shows a video and says 4 seconds. ... - Aaron (92 SE Auto) 00:23:51 11/02/2003 (0)
  • Where does the cutout go, in-place of the CAT? - Lordrandall (92se5) 22:17:19 11/01/2003 (5)
    • Well, you can put the cutout anywhere you want in the exhaust flow --> - Aaron (92 SE Auto) 22:26:04 11/01/2003 (4)
      • Harder shifts I don't mine.... - Lordrandall (92se5) 11:55:54 11/02/2003 (0)
      • i agree with the reduced wheel hop, but the hard shifts are killing me..i think.. nm - lophix (91se) 22:38:09 11/01/2003 (2)
        • You crazy, I LOVE the hard shifts. I wish they were harder sometimes. Are you 5spd? n/m - Aaron (92 SE Auto) 22:52:17 11/01/2003 (1)
          • sure am 5spd...just that i've had manifold stud issues and cant find anything to blame them on (apart from myself that is) nm - lophix (91se) 23:05:17 11/01/2003 (0)
  • Oh yeah another tip; peel the duct tape off after 18 hours and before it completely cures. Came off just fine for me. n/m - Aaron (92 SE Auto) 22:05:50 11/01/2003 (0)
• odometer stopped working - dani9678 (1993 maxima GXE) 17:45:49 11/01/2003 (1)
  • Try punching the trip odo reset button a few times. they have a tendency to stick sometimes when you reset them. nm - Matt (93SE) 18:06:04 11/01/2003 (0)
• OT: Talk about a cheap cross b/w the e-class and the bentley... - lophix (91se) 16:50:17 11/01/2003 (2)
  • Uhhh, interesting styling ;-) - Uncle Pete (89 SE) 17:07:53 11/01/2003 (1)
    • sheesh....talk about throwing it all in the blender nm - lophix (91se) 17:24:39 11/01/2003 (0)
• The secret to taking out the VE water pump. - dmontzsta (92 SE) 14:03:01 11/01/2003 (5)
  • I did it from bottom while putting on a UDP. It's pretty easy if you have a 5spd. n/m - RosenKen (93 SE 5spd) 21:34:30 11/01/2003 (1)
    • Or if you have an impact wrench. I plan to replace my crank oil seal when my water pump goes. 138K miles and counting. n/m - Aaron (92 SE Auto) 21:42:56 11/01/2003 (0)
  • I have done it from the top about 4 years ago... - portdave (93seauto) 18:17:07 11/01/2003 (0)
  • easiest way I've seen so far is to have a helper and--> - Matt (93SE) 14:24:22 11/01/2003 (1)
    • Ditto! - Lordrandall (92se5) 20:11:33 11/01/2003 (0)
• For the benefit of Mr. Brace, here there are some pictures placed, of the Figaro... - Uncle Pete (89 SE) 08:44:41 11/01/2003 (7)
  • AWESOME!!! thanks for the pics - «§» (93 SE) 20:44:30 11/02/2003 (1)
    • Thanks Craig - glad you like it! nm - Uncle Pete (89 SE) 17:37:24 11/03/2003 (0)
  • Very cool whip Pete! - Lordrandall (92se5) 20:50:06 11/01/2003 (0)
  • That car is freakin awesome!!! n/m - Kaleb (Black '93 GXE 5spd) 12:28:45 11/01/2003 (0)
  • It's amazing how much stuff they reuse across all model lines.. - Matt (93SE) 09:55:13 11/01/2003 (0)
  • And what year is this Figaro again? - Jason F (90SE) 09:17:42 11/01/2003 (1)
    • It's a 1991... - Uncle Pete (89 SE) 11:14:09 11/01/2003 (0)
• So do they make it for the VE motor? - Matt (93SE) 22:50:34 10/31/2003 (4)
  • Hahahah! I love how this dude is being ignored! 3#-) n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 02:04:35 11/01/2003 (1)
    • Ignore them and they'll go away. (eventually) :) nm - Matt (93SE) 10:02:15 11/01/2003 (0)
  • Wow, what restraint everyone has.... n/m - Bman (92 SE) 01:53:51 11/01/2003 (0)
  • so do they make it for the ve?? huh?? lol. nm - lophix (91se) 23:22:01 10/31/2003 (0)
• CRAP!! - Jacob ('03 WRX) 21:17:33 10/31/2003 (3)
  • Jacob, we're going to be doing some Jeep work tommorrow. Let me know if you want to do your springs. n/m - Matt (02 WRX / 96ZJ) 00:57:16 11/01/2003 (0)
  • We had something similar to my Max when we were... - Lordrandall (92se5) 23:04:37 10/31/2003 (0)
  • Ugh. Been there. It will come together! n/m - Jeff92se (92se) 22:41:50 10/31/2003 (0)
• Mike etc.. picked up the brackets today. Will test fit this weekend - Jeff92se (92se) 19:31:32 10/31/2003 (2)
  • Out with it - MIKE (93VE) 07:18:57 11/01/2003 (0)
  • Jeff...I'm interested...let me know how the fitment goes. nm - oE (97 TTP) 23:13:05 10/31/2003 (0)
• Tire question - Caleb ('92 SE) 16:55:13 10/31/2003 (9)
  • All season or summer? - Bman (92 SE) 01:49:25 11/01/2003 (1)
    • hmm...definitely All season...we had some flurries the other day:) - Caleb ('92 SE) 12:07:39 11/01/2003 (0)
  • Check out Yokohama AVS ES100. Tirerack.com has a good price and sometimes you can get a local shop to match it. :) n/m - Aaron (92 SE Auto) 19:29:46 10/31/2003 (1)
    • I concur. They are great tires and a great value. n/m - Pervis Anathema ('91 SE) 23:27:58 10/31/2003 (0)
  • Nitto 460. great treadwear and good handling. cheap. use 'em in 215/60/15. works great. nm - Matt (93SE) 17:50:00 10/31/2003 (4)
    • Is that the 460 touring or 450 extreme Matt? Just checking... n/m - Bman (92 SE) 01:50:25 11/01/2003 (2)
      • 460 Grand Touring.. they're a great "highway tire" but not an extreme high performance. --> - Matt (93SE) 09:50:45 11/01/2003 (1)
        • lol, thanks n/m - Bman (92 SE) 23:26:36 11/01/2003 (0)
    • Thanks for the suggestions guys...I'm leaning toward the Nittos, they are cheaper:)nm - Caleb ('92 SE) 22:34:15 10/31/2003 (0)
• Uncle Pete, how you doin'? Is the new Maxima in the UK called the Nissan QX 3.0?? n/m - Will (93 4dsc) 16:11:59 10/31/2003 (2)
  • Great, and no... - Uncle Pete (89 SE) 19:18:18 10/31/2003 (1)
    • Thanks. Ah well. Like you said: "No way in hell my money's going to today's Nissan! (something along the lines of that!)." :o) n/m - Will (93 4dsc) 19:57:16 10/31/2003 (0)
• Got some stuff for sale--> - Kevin (93SE 5sp) 15:51:04 10/31/2003 (0)
• Any one has a "real" aluminum kit intalled - MIKE (93VE) 11:46:31 10/31/2003 (9)
  • i looked into aluminum sheets when i made my kit. - Walka (Black 92 GXE) 19:50:45 10/31/2003 (1)
    • Yes you have help. Thanks - MIKE (93VE) 04:46:53 11/01/2003 (0)
  • i looked into aluminum sheets when i made my kit. - Walka (Black 92 GXE) 19:45:59 10/31/2003 (0)
  • about the only way you can cut that stuff and make it look good is with a laser --> - Matt (93SE) 12:38:55 10/31/2003 (1)
    • Point taken n/m - MIKE (93VE) 12:43:17 10/31/2003 (0)
  • Walka made his own Al dash kit a while back - «§» (93 SE) 12:12:52 10/31/2003 (3)
    • These are the only close-up I can find on the Dot - MIKE (93VE) 12:43:35 10/31/2003 (2)
      • No, those are still the fake ones. I've got some pics of mine, but --> - Matt (93SE) 15:26:03 10/31/2003 (1)
        • server's back up.. link inside. - Matt (93SE) 17:25:06 10/31/2003 (0)
• Finally, I was starting to feel left out --> - Pervis Anathema ('91 SE) 08:14:53 10/31/2003 (10)
  • was it the bracket, or the eye? either way, mufler shop shouldn't have a problem with it. 5 minutes of work. nm - Matt (93SE) 09:21:01 10/31/2003 (9)
    • Actually, if I understand your terms correctly, it wasn't either one (pic) --> - Pervis Anathema ('91 SE) 09:47:34 10/31/2003 (8)
      • You could always get a thicker bar welded to the bottom bracket or - Jeff92se (92se) 12:23:12 10/31/2003 (1)
        • Yep, the bracket metal fatigued and the bar ripped out. n/m - Pervis Anathema ('91 SE) 14:30:07 10/31/2003 (0)
      • Even though I can't see the pic - MIKE (93VE) 10:13:54 10/31/2003 (3)
        • If you get time, can you drop me an e-mail? pervisanathema@hotmail.com Thanks! n/m - Pervis Anathema ('91 SE) 12:10:37 10/31/2003 (2)
          • I can drop you a email tomorrow, I'm sneaking in time here at work n/m - MIKE (93VE) 12:24:19 10/31/2003 (1)
            • Thanks :) n/m - Pervis Anathema ('91 SE) 14:10:08 10/31/2003 (0)
      • Yeah, that's what I meant by "bracket" easy fix. just pull it off the car and take it in. --> - Matt (93SE) 10:10:11 10/31/2003 (1)
        • Thanks, will do. n/m - Pervis Anathema ('91 SE) 12:09:48 10/31/2003 (0)
• Happy Halloween everyone, here's a pumpkin pic! - Walka (Black 92 GXE) 03:39:41 10/31/2003 (1)
  • Sholin Temple n/m - MIKE (93VE) 05:47:15 10/31/2003 (0)
• ATTN: Kaleb. I luv y00! Got the Nismo remote oil adapter already. Thanks a bunch!! n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 03:11:07 10/31/2003 (5)
  • DAMN! It takes you only a few more hours than it takes me to get parts from them! - Matt (93SE) 08:08:08 10/31/2003 (3)
    • It's the "special project priority" shipping scheme for Australians ... - The Max (92 J30 Maxima (turbo project nearing completion)) 08:42:44 10/31/2003 (2)
      • Glad everything's perfect. Please take pics of how you mount the filter, because I'm interested in doing it. n/m - Kaleb (Black '93 GXE 5spd) 10:08:54 10/31/2003 (1)
        • I'm getting the Amsoil BMK-13 Bypass Filter set up. Will let you know. n/m - The Max (92 J30 Maxima (turbo project nearing completion)) 16:57:19 10/31/2003 (0)
  • awww, sounds like Valentine's Day around here! nm - Walka (Black 92 GXE) 03:37:20 10/31/2003 (0)
• nissan recalling Pulsars and Xtrails - Pranol (92 VG Aus Spec) 22:55:46 10/30/2003 (0)
• Detonation anyone...spark plug pics...not from my max but interesting anyway... - awsm66 (93SE) 20:27:43 10/30/2003 (2)
  • Yikes! It looks like they were still firing though? n/m - Bman (92 SE) 22:11:31 10/30/2003 (0)
  • IMO Bosch Plats plugs are crap...nm - DanNY (91SE) 21:35:42 10/30/2003 (0)
• OT. Funniest flash ive seen in a while.. worth clicking - Brandon (90 gxe) 19:35:32 10/30/2003 (6)
  • What's going on eh? ;) n/m - Bman (92 SE) 00:30:24 10/31/2003 (0)
  • Lazy link inside so I can right click and save as... - Aaron (92 SE Auto) 20:39:50 10/30/2003 (0)
  • funny sh*t nm - Chris91se (91se) 20:29:16 10/30/2003 (0)
  • Nice! nm - Jacob ('03 WRX) 20:05:45 10/30/2003 (0)
  • LMAO!!!! - Lordrandall (92se5) 19:49:32 10/30/2003 (0)
  • BWAAHAHAHAHAH! - Matt (93SE) 19:44:32 10/30/2003 (0)
• Repost-- Matt's Mod of the Week!! - Matt (93SE) 19:15:37 10/30/2003 (6)
  • I'll have to put it further down on the list..... - 8ball (89 SE spd) 19:45:29 10/30/2003 (3)
    • no radius arms yet, but I've got some other stuff in the works --> - Matt (93SE) 19:58:13 10/30/2003 (2)
      • Cool, can't wait for the website. Any idea on $$ for that RSTB yet? n/m - Bman (92 SE) 20:11:15 10/30/2003 (1)
        • getting there. the brackets are at the shop being cut now. need to find some other parts then we'll be good. nm - Matt (93SE) 21:13:47 10/30/2003 (0)
  • I really want it but Christmas funds are low so will have to wait till after Dec. n/m - SeaMAX (93 SE) 19:35:04 10/30/2003 (1)
    • Credit! I take paypal! :) nm - Matt (93se) 19:40:08 10/30/2003 (0)
• The question again - Patrick C. (92GXE) 19:10:52 10/30/2003 (2)
  • I already answered that question (maybe it was archived before you saw it)...Its a direct swap... - awsm66 (93SE) 19:47:33 10/30/2003 (0)
  • forums.maxima.org... go there and use the search funxion. nm - Matt (93SE) 19:17:00 10/30/2003 (0)
• First hint, not very helpful. I first posted this picture in 1994. n/m - Administrator (Maxima) 19:09:41 10/30/2003 (1)
  • Ouch, I suck at the interweb. Can't even reply properly to my own post... see below n/m - Administrator (Maxima) 19:10:21 10/30/2003 (0)
• New front page contest (kinda) - Administrator (02 WRX / 96ZJ) 19:05:43 10/30/2003 (17)
  • OJ's house - «§» (93 SE) 19:38:58 10/30/2003 (9)
    • WE HAVE A WINNER! (more) - Administrator (Maxima) 19:47:29 10/30/2003 (8)
      • So Cemetery was partially right? :wall: nm - Lordrandall (92se5) 10:20:39 10/31/2003 (0)
      • I remembered from last time - «§» (RESPECT MY AUTHORITAE!) 19:56:24 10/30/2003 (0)
      • Wha.... is this the "OJ" most ppl tend to think about? n/m - Bman (92 SE) 19:51:47 10/30/2003 (5)
        • football player OJ Simpson.... - «§» (93 SE) 19:59:06 10/30/2003 (2)
          • LOL! I think *everyone* knows.... - Bman (92 SE) 20:10:10 10/30/2003 (1)
            • *Shrugs* Never heard of them... - Uncle Pete (89 SE) 04:00:13 10/31/2003 (0)
        • BTW, the front page looks pretty good for a DIY job I think n/m - Bman (92 SE) 19:52:30 10/30/2003 (1)
          • Thanks! The whole website is "DIY". n/m - Matt (02 WRX / 96ZJ) 20:30:43 10/30/2003 (0)
  • damn , i was gonan guess homestead! haha - Brandon (90 gxe ) 19:33:28 10/30/2003 (0)
  • Stupid hint #2, the picture was taken in/near Los Angeles. n/m - Administrator (Maxima) 19:25:13 10/30/2003 (1)
    • Is it LA? n/m - Aaron (92 SE Auto) 19:27:18 10/30/2003 (0)
  • Looks like a cemetery or a golf course. :) nm - Lordrandall (92se5) 19:10:05 10/30/2003 (0)
  • some park? - Pranol (92 VG Aus Spec) 19:07:21 10/30/2003 (0)
  • Somewhere near your house as Jeffy was driving off with your baby? :) nm - Matt (93SE) 19:07:03 10/30/2003 (1)
    • Nope, then it wouldn't have a spoiler! ;) nm - Lordrandall (92se5) 19:08:58 10/30/2003 (0)
• Four? - Matt (93SE) 19:04:12 10/30/2003 (0)
• three. - Matt (93SE) 19:03:59 10/30/2003 (0)
• two. - Matt (93SE) 19:03:47 10/30/2003 (0)
• Bah. - Matt (93SE) 19:03:25 10/30/2003 (2)
  • Phreak - Lordrandall (92se5) 19:05:37 10/30/2003 (0)
  • You win for 4dsc.com addict of the week! n/m - Matt (used to be 92 SE) 19:04:14 10/30/2003 (0)

WWWBoard created by Matt Wright and can be found at Matt's Script Archive

© 1998-2008 4DSC.com | Terms of Use | Contact